Stanton Gutters Book online
Installation

Seamless gutters, explained

Published

Seamless gutter machine in a work trailer forming one long white aluminum gutter in a driveway

Seamless gutters are gutters made in one continuous piece for each straight run of your roof. They are formed at your house, from a roll of metal, and cut to the exact length of each side. A 40-foot wall gets one 40-foot gutter with no joints along it.

That is the whole idea. Fewer joints means fewer places to leak.

How seamless gutters are made

The installer arrives with a gutter machine, usually in a trailer or the back of a truck, and a large coil of flat aluminum already painted in the color you picked.

The flat metal feeds into one end of the machine. A series of rollers bends it step by step into the gutter shape, and a finished gutter comes out the other end. The installer measures the roofline, runs out exactly that length and cuts it.

That is why seamless gutters can't be bought off a shelf. Each piece is made for one specific edge of one specific house.

Seamless vs sectional gutters

Sectional gutters are the kind sold at home improvement stores. They come in fixed lengths, commonly 10 feet, and snap or screw together with a connector at every joint. On a 40-foot wall that is at least three joints in the middle of the run.

Each joint is sealed, and every sealant dries out in time. Atlanta summers speed that up. The metal expands in the heat and shrinks at night, and that movement works on each joint day after day. Joints are also where debris catches, because the connector makes a small ridge inside the gutter.

Seamless gutters remove the joints from the middle of the run. They also look cleaner from the street, since there are no connector bands breaking up the line.

Where the joints still are

"Seamless" doesn't mean no joints anywhere, and it is better to know that up front.

  • Corners. Where two runs meet at an inside or outside corner, the pieces are joined and sealed.
  • End caps. Each run is closed off at the ends.
  • Downspout outlets. A hole is cut in the bottom of the gutter and an outlet is fitted.

These are the places to check every few years. On a seamless system they are the only places a leak can start, which makes a leak quick to find and fix.

What they are made of

Most seamless gutters on Atlanta homes are aluminum. It doesn't rust, it is light enough not to strain the fascia, and it comes pre-painted in a wide range of colors so it can match the trim.

Aluminum comes in different thicknesses. The two you will hear about are .027 inch and .032 inch. The thicker one holds its shape better under ladders, branches and the weight of a clogged gutter. Ask which one is being quoted.

Copper and steel can be made seamless too. Copper is used mostly on historic and high-end homes. Steel is stronger than aluminum, but it will rust if the coating gets scratched.

Shapes and sizes

The usual shape is called K-style. It has a flat back that sits against the fascia and a front edge shaped a bit like crown molding. It comes in 5-inch and 6-inch widths. Half-round gutters, shaped like a tube cut lengthwise, are an option for older homes where that look fits the house.

Are seamless gutters worth it?

For a whole-house install, yes, and in practice they are what most professional installers put up. The material is made to fit, it goes up faster than piecing sections together, and there is far less to maintain afterward.

Sectional gutters still make sense for a small job you are doing yourself, like a shed or a short porch roof, where a machine and a crew would be more than the job needs.

Common questions

Do seamless gutters leak?

Much less often than sectional gutters. When they do, it is at a corner, an end cap or a downspout outlet, and those can be resealed.

How long do seamless aluminum gutters last?

About 20 years is typical, and longer when they are kept clean and hung on solid wood.

Can seamless gutters be installed in one day?

On most single-family homes, yes. The gutters are formed and hung the same day.

Thinking about new gutters?

We form seamless aluminum gutters on site, sized to your roof and matched to your trim. Book online or read about gutter installation in Metro Atlanta.

Rather have someone look at it for you?

Book online